Atlas Electrical UK

skilled in the installation of mains and sub-mains distribution

if you are looking for an experienced & reputable electrical contractor

call us today

01789 774066

Our reputation is your guarantee

ATLAS ELECTRICAL UK ARE HIGHLY SKILLED AND EXPERIENCED IN THE INSTALLATION OF MAINS AND SUB-MAINS DISTRIBUTION BOARDS/PANELS IN A RANGE OF COMMERCIAL AND INDUSTRIAL ENVIRONMENTS

From initial site surveys and system design through to the installation and certification, we can manage the entire project.We understand that every requirement is different and as approved commercial contractors
we ensure every installation is carried out to BS7671, conforming to L2 of the UK building regulations.

Our complete range of power supply and distribution services includes:

  • General Three Phase and Single Phase Power Installation
  • Power to Mechanical Plant and Control Systems
  • MCCB Panel Board and Switchboard Installation
  • Generator and Auto Failure Change Over Systems Installation
  • Metering and Service Monitoring Units Installation
  • Transient Surge Suppression Systems Installation
  • Main Earthing Terminal & Earth Bonding Installation
  • Lightning Protection System
  • Sub-Mains Distribution
  • MCB Sub Distribution Board installation

3 phase

Atlas Electrical UK are able to carry out installations, maintenance and repairs of three phase systems used for power distribution and equipment to supply industrial and commercial demand.

Our qualified and experienced three phase electrical engineers will ensure your three phase installation is installed or repaired to the highest standard as well as making sure your machinery and equipment loads are balanced.

After years of additions and alterations loads can become unbalanced which will cause issues within a 3-Phase electrical system and should be rectified as soon as possible as this will affect the efficiency of your system and increase usage costs.

As approved commercial electrical contractors, we can install or repair your three phase wiring system correctly, efficiently and safely within your factory, industrial unit or other commercial premises.

Atlas Electrical UK believe no job is too big or too small. Our qualified electricians are happy to install, repair or replace electrical sockets at your commercial or industrial premises.

Whether it’s one socket or one hundred sockets, all work is carried out to industry regulations BS7671, along with the peace of mind that we’re NICEIC registered and carry the Trustmark stamp of quality.

We can provide electrical safety certificates if applicable to your business and can carry out electrical installation condition reports (EICRs) with the necessary certification.

Whether for security purposes or to simply enhance the efficiency or capability of your business, there are many reasons why you might require outdoor lighting and power.

Outdoor lighting and power falls under Part P of the Building Regulations law which requires that electrics are installed by a certified electrician to the latest IEE Wiring Regulations.

For example, every cable, wire, socket, appliance and light used outdoors has to be protected by an RCD (Residual Current Device) that reduces the risk of a fatal electric shock by instantly cutting off the power should anything happen to make power leak to earth. Any external power supply should also be installed with appropriate weatherproof outdoor fittings.

Atlas Electrical UK, as approved and experienced commercial electricians, can supply and install outdoor lighting and power systems to the legally required standards for:

  • Lighting
  • Security
  • Car parks
  • Loading bays
  • Construction sites
  • Pathways and walkways
  • Emergency exits
  • Signage lighting
  • Outdoor electronic advertising
  • Large outdoor screens
  • Street lighting